Adhesion Promoters

One of the challenges our customers have to deal with is coating a substrate that lacks adhesion. Adhesion promoters can achieve the desired level of adhesion. We have a range of adhesion promoters for metal, plastic, glass, composite, ceramic, and even wood.

Products

Filter by:

No Results

  • Plastic Adhesion Promoters

    W-700A Series

    Cardinal's W-700-A is a plastic adhesion promoter for polyolefin based plastics PPO and TPO. This product is applied at a low film thickness. Read More
    Typical Uses
    • Plastic substrates
    • PPO and TPO substrates
    Benefits
    • Fast dry
    • Easy to apply
    • RoHS / WEEE Compliant

  • Glass Adhesion Promoter

    W-805 A+B

    Cardinal's W-805-A has been formulated to be applied by wiping the mixed coating onto glass. This material enhances adhesion to glass substrates. Read More
    Typical Uses
    • Glass substrates
    Benefits
    • Fast dry
    • Easy to apply
    • RoHS / WEEE Compliant

  • Glass Adhesion Promoters

    W-808 Series

    Cardinal's W-808 has been formulated to be applied by wiping the coating onto glass.
    This material enhances adhesion to glass substrates.

  • Adhesion Promoter

    W-1000 Series

    Cardinal's W-1000 was formulated to improve adhesion to ferrous, non-ferrrous and ceramic substrates. W-1000 is a zero VOC one component solution used to improve adhesion when applying industrial coatings to metal and glass. W-1000 is not flammable nor does it contain any chlorinated solvents. Read More
    Typical Uses
    • Stainless steel
    • Ferrous and non ferrous substrates
    • Glass/ceramic
    Benefits
    • Fast dry
    • Zero VOC content
    • Easy to apply
    • RoHS / WEEE Compliant
    Meets 70% of Our Green Criteria: 1. HAPS Free Above 1% of Composition. 2. Waterbased. 3.REACH Compliant . 4. Conflict Mineral Free. 5. 1.0 lb/gl or Less VOC. 6. ROHS Compliant. 7. Air Dry. 8. LEED Compliant. 9. Prop 65 Class 1 & 2A. 10. Chrome Free Learn More

  • Plastic Adhesion Promoter

    6SAP-100

    Cardinal’s 6SAP-100 is a plastic adhesion promoter designed to improve adhesion on
    plastic substrates where adhesion is difficult. 6SAP-100 acts as an intermediate
    coating between the substrate and the topcoat.
    Meets 70% of Our Green Criteria: 1. HAPS Free Above 1% of Composition. 2. Waterbased. 3.REACH Compliant . 4. Conflict Mineral Free. 5. 1.0 lb/gl or Less VOC. 6. ROHS Compliant. 7. Air Dry. 8. LEED Compliant. 9. Prop 65 Class 1 & 2A. 10. Chrome Free Learn More

  • Adhesion Promoter

    6SAP-200

    Cardinal’s 6SAP-200 is a metal adhesion promoter designed to improve adhesion on
    metal substrates where adhesion is difficult. 6SAP-200 acts as an intermediate
    coating between the substrate and the topcoat.
    Meets 70% of Our Green Criteria: 1. HAPS Free Above 1% of Composition. 2. Waterbased. 3.REACH Compliant . 4. Conflict Mineral Free. 5. 1.0 lb/gl or Less VOC. 6. ROHS Compliant. 7. Air Dry. 8. LEED Compliant. 9. Prop 65 Class 1 & 2A. 10. Chrome Free Learn More

Knowledge Center

Substrates

The type of substrate that you’re looking to coat will play a huge role in deciding which coating will work best.  Each has its own particular challenges that need to be addressed if the coating is to work.  We've a wide range of high quality products so customers can make the right choice when picking a coating for any type of substrate.

Learn from us