UV Curable

For over 60 years we’ve been an innovator in the field of industrial coatings. This led to the development of a range of low and zero VOC UV Curable coatings. Our UV Curable coatings are for various substrates, and meet the application needs of our customers.

Products

Filter by:

No Results

  • High Gloss Polyester UV Clear

    U4PA-CLE22

    An unsaturated polyester / styrene clear top coat designed to be used on wooden musical instruments. Characteristics include high clarity, high gloss, and excellent levelling and sag resistances. Buffing can be readily achieved utilizing 1,000 grit sandpaper, followed by buffing with Menzerna #18 and 16 compound. Read More
    Typical Uses
    - Musical instraments
    Benefits
    - Fast cure response
    - Excellent sand-ability
    - Inter-coat adhesion

  • Polyester Basecoat

    U4PA-CLE25

    Cardinal's U4PA-CLE25 is a solventborne high build UV curable styrene unsaturated polyester basecoat. This product can cure with UV or peroxide cure. It exhibits sag resistance, great sanding properties and fast cure speed. Read More
    Typical Uses
    - Fine musical instruments
    Benefits
    - Sag resistance
    - High build
    - Great sandability
    - Cure speed

  • SATIN UV DUAL CURE SEALER

    U4UA-CLE15-6

    Cardinal's U4UA-CLE15-6 is a solventborne UV curable urethane acrylate satin finish. This product exhibits a smooth satin finishes, reduced burnishing resistance, ease of application, fast tack time and good cure speed. Read More
    Typical Uses
    - Fine musical instruments
    Benefits
    - Fine Satin Finish
    - Fast Tack Time
    - Burnish Resistance
    - Ease of Application

  • UV DUAL CURE SEALER

    U4UA-CLE02-2 SERIES

    Cardinal's U4UA-CLE02 is a solventborne one component UV curable gloss urethane topcoat. This finish is designed to finish musical instruments and other sealed wood products. It is a high solids low VOC material that leaves a beautiful glossy finish. Read More
    Typical Uses
    - Fine musical instruments
    Benefits
    - UV curable
    - Fast Tack Time
    - Adhesion
    - Ease of Application

  • GLOSS URETHANE TOP COAT

    U4UA-CLE04 SERIES

    Cardinal's U4UA-CLE04 is a solventborne one component UV curable gloss urethane topcoat. This finish is designed to finish musical instruments and other sealed wood products. It is a high solids low VOC material that leaves a beautiful glossy finish. Read More
    Typical Uses
    - Fine musical instruments
    Benefits
    - UV curable
    - Fast Tack Time
    - Adhesion
    - Ease of Application

  • FILLERS / UV CURED

    U1PA-FE02 SERIES

    Cardinal's U1PA-FE02 is a UV cured wood pore filler on a variety of wood. Characteristics include; rapid cure response with excellent sand-ability and good inter-coat adhesion. This product low shrinkage, and provides excellent pore filling capability on many types of wood in one or two coats. The gel filler has been formulated with low irritancy ingredients, and does not contain styrene.
    Read More
    Typical Uses
    - Fine musical instruments
    Benefits
    - No VOC
    - Fast Cure
    - Excellent Clarity

Knowledge Center

Substrates

The type of substrate that you’re looking to coat will play a huge role in deciding which coating will work best.  Each has its own particular challenges that need to be addressed if the coating is to work.  We've a wide range of high quality products so customers can make the right choice when picking a coating for any type of substrate.

Learn from us